V-belts and pulleys, matched to what you're running
A glazed, cracked or snapped belt can shut down a mower deck, a tiller, a compressor or a shop machine in a heartbeat. Greenville Bearing Supply Inc. carries and sources belts and pulleys for Greenville, TX and the rest of Hunt County, so you can match what you have and get back to work. Our shop on Wesley Street (75402) is a simple stop: bring the old belt, tell us what it runs, and we'll help find the fit.
Belt and pulley sizing has plenty of near-misses — a belt that looks the same but has a different length or cross-section won't run properly. That's why we start from your old belt and its numbers rather than guessing, and why many customers pair a new belt with fresh bearings or idler pulleys while the drive is apart.
What you'll find: Belts & Pulleys in Greenville, TX
Here's the range of belts & pulleys products and related parts you can expect at a hardware and industrial supply shop like ours. Stock changes, so call ahead if you need something specific.
V-belts
- Classical V-belts (A, B and C sections)
- Narrow wedge V-belts (3V, 5V and 8V)
- Fractional-horsepower V-belts (3L, 4L and 5L)
- Wrapped and raw-edge cogged V-belts
- Double V (hex) belts
- Variable-speed and aramid-reinforced belts
Mower, tractor & power-equipment belts
- Riding mower and lawn tractor deck belts
- Zero-turn deck and drive belts
- Walk-behind and self-propelled mower belts
- Garden tiller drive belts
- Wood chipper, log splitter and shredder belts
- Belts for older and vintage garden tractors
Pulleys & sheaves
- Single- and multi-groove V-belt pulleys
- Fixed-bore and bushed sheaves (taper-lock and QD)
- Flat and V-groove idler pulleys
- Spring-loaded tensioner pulleys
- Mower spindle and deck pulleys
- Engine and clutch pulleys
Drive accessories
- Taper-lock bushings and keystock
- Set screws, keys and shaft collars
- Belt dressing and belt gauges
- Idler arms, springs and mounting hardware
Belts and pulleys for lawn, ranch and shop
Mower decks are the most common reason people come in. Mowing season in North Texas is hard on belts, and a deck belt that has stretched or frayed will slip, squeal or jump off its pulleys. Ranch and farm equipment — tillers, wood chippers, log splitters and shredders — run on the same family of V-belts, as do shop compressors, grinders and drill presses. See our lawn mower parts and blades for the rest of a deck rebuild.
If a belt keeps failing early, the culprit is often a worn pulley, a bad idler bearing or a misaligned drive rather than the belt itself. Bring the pulley or idler along and we can help you check it, then replace the bearing or pulley if needed.
How to find the right belt
- Check the back of the old belt for a printed part number — it's the fastest route to a match.
- No number? Bring the belt itself. We can measure the length, top width and thickness.
- Note the equipment make, model and deck size (for a mower, for example, a 42-inch deck).
- On multi-belt drives, replace belts as a matched set so they share the load evenly.
- Inspect the pulleys: shiny, wavy or chipped grooves will wear out a new belt quickly.
What local customers say
“Went in to exchange a belt I ordered for the actual belt I needed. The mistake was mine, but they were so gracious they wouldn't let me pay the additional cost for the correct belt. Glad to do business with them.”
— Google review
“They have all kinds of bearing and belts, lawn mower blades, Pulleys. If you can fix it, they have the parts.”
— Google review
Belts & pulleys in Greenville, TX: frequently asked questions
Where can I buy V-belts and mower belts in Greenville, TX?
Greenville Bearing Supply Inc., 6408 Wesley St, Greenville, TX 75402. Call (903) 454-4545 or stop by Monday to Friday, 7:30 AM to 5:00 PM, or Saturday, 8:00 AM to 12:00 PM.
How do I know which belt fits my mower deck?
Start with the part number printed on your old belt, or bring the belt itself. Tell us the make, model and deck size and we'll help match the length and width, and cross-reference the part number if needed.
What's the difference between a cogged V-belt and a standard V-belt?
A cogged (notched) belt has grooves on its underside that let it bend more easily around small pulleys, run cooler and often last longer. A standard wrapped V-belt is smoother and common on many lawn and shop drives. Either way, the belt's cross-section has to match the pulley groove.
More products in Greenville, TX
Bearings
Bearings in Greenville, TX →Lawn Mower Parts
Lawn Mower Parts in Greenville, TX →Hydraulic Hose
Hydraulic Hose in Greenville, TX →Seals & O-Rings
Seals & O-Rings in Greenville, TX →Chain & Sprockets
Chain & Sprockets in Greenville, TX →Door Hardware & Closers
Door Closers in Greenville, TX →Visit us on Wesley Street
Greenville Bearing Supply Inc.
6408 Wesley St, Greenville, TX 75402
Mon–Fri 7:30 AM–5:00 PM · Sat 8:00 AM–12:00 PM · Sun Closed